LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS, Grade D Shipbuilding steel plate
Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,Shipbuilding steel Grade D is a common tensile strength steel . ASTM A 131 Grade D steel plate is usual for shipbuilding and oil platform purpose.D shipbuilding steel is the Hull structural steel which with a good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and welding properties.The shipbuilding steel grade D is mainly used in the manufacture of the ship's hull structure whose weight is below 10000 tons,and usually do navigation around coastal and river area.
Grade D Shipbuilding steel plate specification:
Thickness: 4mm to 260mm,
Width: 1200mm to 4000mm
Length: 3000mm to 18000mm.
Grade D steel plate Chemical Composition
Grade |
C max |
Si max |
Mn |
P max |
S max |
Als min |
Grade D |
0.21 |
0.35 |
0.60-1.20 |
0.035 |
0.035 |
0.015 |
Note: CE: C+1/6Mn ≤ 0.40% Cu ≤ 0.35%,Ni ≤ 0.30%≤
Grade D steel plate Mechanical Property
Grade |
Rm |
Re(MPa) min |
A% min |
Akv/J min |
||||||
Grade D |
400-520 |
235 |
22 |
E.T °C |
Thickness (mm) |
|||||
-20 |
≤ 50 |
>50-70 |
>70-100 |
|||||||
L |
C |
L |
C |
L |
C |
|||||
27 |
20 |
34 |
24 |
41 |
27 |
Note: In the list , Rm: .tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.
Grade D steel plate Condition Of Delivery
Grade |
category |
The thickness of steel |
||||
≤ 12 |
>12.5-25 |
>25-35 |
>35-50 |
>50-100 |
||
Grade D |
Plate/sheet |
A(50) |
N(50) |
N(50) |
||
Profile steel |
N(50) |
- |
Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2. The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.
Grade D steel plate Contrast in the different standard
ASTM A131M |
TOCT 5521 |
JIS G3106 |
BS LR |
GB712 |
Grade D |
GradeD |
SM400B |
Grade D |
Grade D |
Grade D steel plate Available Specification
variety |
Thickness (mm) | Width (mm) | Longth/ inner diameter (mm) | |
Shipbuilidng plate | cutting edges | 6~200 | 1500~3000 | 3000~15000 |
non- cutting edges | 1300~3000 | |||
Shipbuilidng coil | cutting edges | 1.2~19 | 1500~2000 | 760+20~760-70 |
non-cutting edges | 1510~2010 |
Grade D steel plate theoretical weight
Thickness (mm) |
theoretical weight | Thickness (mm) | theoretical weight | ||
Kg/ft2 | Kg/m2 | Kg/ ft2 | Kg/m2 | ||
6 | 4.376 | 47.10 | 25 | 18.962 | 196.25 |
7 | 5.105 | 54.95 | 26 | 20.420 | 204.10 |
8 | 5.834 | 62.80 | 28 | 21.879 | 219.80 |
10 | 7.293 | 78.50 | 30 | 23.337 | 235.50 |
11 | 8.751 | 86.35 | 32 | 25.525 | 251.20 |
12 | 10.21 | 94.20 | 34 | 26.254 | 266.90 |
14 | 10.939 | 109.90 | 35 | 27.713 | 274.75 |
16 | 11.669 | 125.60 | 40 | 29.172 | 314.00 |
18 | 13.127 | 141.30 | 45 | 32.818 | 353.25 |
20 | 14.586 | 157.00 | 48 | 35.006 | 376.80 |
22 | 16.044 | 172.70 | 50 | 36.464 | 392.50 |
24 | 18.232 | 188.40 |
Grade D steel plate dimensional deviation
nominal thickness(mm) |
The thickness deviation with following width (mm) | |||
≤1200 | >1200~1500 | >1500~1800 | >1800 | |
>6.0~8.0 | ±0.29 | ±0.30 | ±0.31 | ±0.35 |
>8.0~10.0 | ±0.32 | ±0.33 | ±0.34 | ±0.35 |
>10.0~12.0 | ±0.35 | ±0.36 | ±0.37 | ±0.43 |
nominal thickness(mm)
|
minus deviation (mm) | The thickness deviation with following width (mm) | |||||||||
> 1000 ~1200 | > 1200 ~1500 | > 1500 ~1700 | > 1700 ~1800 | > 1800 ~2000 | > 2000 ~2300 | > 2300 ~2500 | > 2500 ~2600 | 2600 ~2800 | > 2800 ~3000 | ||
>12~25 | -0.8 | +0.2 | +0.2 | +0.3 | +0.4 | +0.6 | +0.8 | +0.8 | +1.0 | +1.1 | +1.2 |
>25~30 | -0.9 | +0.2 | +0.2 | +0.3 | +0.4 | +0.6 | +0.8 | +0.9 | +1.0 | +1.1 | +1.2 |
>30~34 | -1.0 | +0.2 | +0.3 | +0.3 | +0.4 | +0.6 | +0.8 | +0.9 | +1.0 | +1.2 | +1.3 |
>34~40 | -1.1 | +0.3 | +0.4 | +0.5 | +0.6 | +0.7 | +0.9 | +1.0 | +1.1 | +1.3 | +1.4 |
>40~45 | -1.2 | +0.4 | +0.5 | +0.6 | +0.7 | +0.8 | +1.0 | +1.1 | +1.2 | +1.4 | +1.5 |
Grade D shipbuilding steel is offered by bebon , we keep more than 10000 ton Grade D shipbuilding steel spotevery month , any need in Grade D shipbuilding steel , please contact us!
We receive enquiries in English, Español (Spanish), Русский язык (Russian), Français (French) and العربية (Arabic). Our professional team will reply to you within 24 Hour. Please feel free to contact us!